How to apply
 |
Please pay attention to the direction. |
|---|---|
 |
The mortar, block, concrete, ALC, gypsum board, chipboard, and wooden base are available to apply on.
 |
 |
Check the surface of the wall if it the surface asperity is under 10mm,using plumb. If it has hubbly surface, put the steel net to add the strength, and put the coarse stuff. Finish flat with trowel, and confirm the coarse stuff is hardened. |
 |
Apply Namako walls from the bottom of the wall to top. The baseboard must be horizontally-emplaced.
 |
 |
Use diamond cutter to cut the tiles.
 |
 |
Grout between tiles with white cement.
 |
 |
Please use wet-sponge to clean the tiles(black tiles). For the joint (white joint), wipe hard by white waste cloth, or sand with abrasive paper. (The sandpaper should be good for #240.)
 |
If you are a individual customer or a plasterer, please feel free to contact us for more information. We will cheerfully reply to any inquiries about Namako walls.
